PEROCDECK 506 & 310
Heavy duty, self levelling, non slip deck protective coatings with thickness form 3 mm to 5 mm DFT. The PEROCDECK 506 & 310 can be installed within 4 hours and fully cured after 1 hour even at low ambient temperature (10 ° C). Exceptional mechanical resistance and long lasting performance (over 1-years on oil rigs). Used on oil rigs in the North Sea for maintenance and on Spanish tuna ships for new construction and maintenance.
THE NEUTRANT HT 411
The Neutrant HT 411 is a surface tolerant. single-component protective coating with very powerful anti corrosion properties. Very easy manual application on piping (Up to 90 ° C). Especially suited for high ambient condition of application. A good alternative zinc-rich epoxy coatings when airless cannot be used especiallty on top side of oil rigs.
Main features
- Excellent High Mechanical Resistance
- Optimum Friction Test Results
- Suitable For Application Under Severe Weather Conditions
- Minimum Down Time Due to Very Fast Curing Time
- Excellent Deck Leveling Capabilities
- User Friendly
- Self - Leveling Solvent Free Non Toxic Material
SAVE YOUR TIME AND MONEY
PEROCDECK is not epoxy based, it is methacrylate based, which is much more DURABLE and can last at least 10 YEARS under severe conditions.
The product and fully cure within one hour, which is not possible for epoxy based alternative.
It can be applied on high water pressure jetting surface preparation which is not recommended for epoxy based system, and it is more economical, hazard free and quicker.
PROTECT YOUR FLOOR
-
100% deck surface restoration
-
Extend the life of at least another 10 years and prevent further corrosion
Perocdeck Coating
PERODECK
Durability
Superior durability
Minimum Surface Preparation
High rate of application especially fr large areas with minimum surface preparation and product preparation.
Low Temperature
Can be applied at very low temperature (+5°C) with high humidity level (up to 95%)
Almost any Surface
Applicable over irregular surfaces including weld seams, sharp edges or highly uneven adhered aged paint systems.
Deck Leveling
Deck leveling capability suitable to eliminate paddles and cavities retaining oil and grease.
Fire resistance
Fire resistance: M2 classification, with low smoke emission and no sudden loss of mechanical properties at high temperatures
Cost effective and easy to maintain
Low material and labour costs. Easy to maintain with good uniformity of colours after repair.
No Joins
No part exposed to water penetration. Very low maintenance required
No Hazardous
No hazardous equipment used for the application of the material.
Bitumen Deck Tile Systems
NORMAL COATING
Durability
Become brittle after some time.
Surface Preparation
Low rate of application due to surface preparation (elimination of profile irregularities by needle gunning), prodcut preparation and tiles adjustment.
Temperature
The use of an epoxy compound implies restricted range of temperature
Surface
Not applicable over uneven surfaces, sharp edges, irregular plate profiles or highly uneven aged paint systems.
Deck Leveling
No deck leveling capabilty
Fire Resistance
To our knowledge no specific fire resistance and probable high smoke emission in case of fire
Cost of Maintenance
Expensive and recurrent maintenance: High material and labour costs (high losses of material, low rate of application). Repairs usually end up in patchwork colours.
Joins
eventually joints may lead to inevitable water penetration resulting in major disbonding problems and high maintenance costs.
Hazardous
Hazardous equipment might be needed for the application (tile heater).
MALAYSIA
Main office
No.306-B, 2nd Floor,
Lorong Perak Melawati Square,
Taman Melawati Kuala Lumpur
53100 Malaysia
Phone : +603-4108 1028 / 03-4101 9939
Email : info@pj-energy.com.my
THAILAND
PJ Energy Services Co., Ltd
No. 53/15 Soi Nimitmai 18, Nimitmai Rd., Saikongdin, Klongsamwa, Bangkok 10510, Thailand.
Phone : +662 906 9853-4 / +66 906 9855
Email : admin@pj-energy.com